Coverpage >

Top Of The Tools

trenner
Bild1
Files for slotting a guitar nut. Made in Switzerland.
 
Detalles
No.Art.
Descripción
  Precio 
Encargar
09130 0,3mm (string gauge 009-010)
19,95 EUR
09131 0,4mm (string gauge 011-013)
19,95 EUR
09132 0,5mm (string gauge 015-017)
19,95 EUR
09133 0,6mm (string gauge 020-024)
19,95 EUR
09134 0,7mm (string gauge 026-030)
19,95 EUR
09135 0,8mm (string gauge 032-034)
19,95 EUR
09136 0,9mm (string gauge 036-038)
19,95 EUR
09137 1,0mm (string gauge 040-042)
19,95 EUR
09138 1,1mm (string gauge 044-046)
19,95 EUR
09139 1,2mm (string gauge 048-052)
19,95 EUR
09140 1,5mm (string gauge 060-070)
19,95 EUR
Bild1
Steel saws for slotting a guitar nut. The 0,4mm blade works for E and B string.
Detalles
No.Art.
Descripción
  Precio 
Encargar
09220 0,4mm (for E and B string)
10,80 EUR
09221 0,5mm
10,80 EUR
09222 0,6mm
10,80 EUR
09223 0,7mm
10,80 EUR
09224 0,8mm
12,90 EUR
09225 1,0 mm
14,50 EUR
Bild1
Each steel file has a rubber-coated handle and different thickness on each cutting edge (string gauges: 010/026, 017/046, 013/036). This set of 3 files has been designed for 010 to 046 strings but a smaller edge can also be rocked side-to-side to widen a slot to a bigger size.
Detalles
No.Art.
 
  Precio 
Encargar
09174  
89,00 EUR
Bild1
The set contains a saw of 1 mm thickness for preslotting the nut and a round file for doing the final work.
Detalles
No.Art.
 
  Precio 
Encargar
09032  
18,50 EUR
Bild1
Round files with different diameters for slotting a bass nut.

Detalles
No.Art.
Descripción
  Precio 
Encargar
09143 2,1mm (string gauge 035-080)
8,90 EUR
09144 2,8mm (string gauge 070-105)
7,30 EUR
09145 3,2mm (string gauge 080-130)
8,90 EUR
Bild1
For restoring fret slots or for slotting new fretboards. Fret saw with a blade (lenght: 25cm) made of Sheffield-steel. The blade widht of 0,58mm (0.023") is perfect for fret slots. Features two holes in the blade for mounting a depht stop (not included), a polished brass back, and a rosewood handle.
Detalles
No.Art.
 
  Precio 
Encargar
09038  
26,90 EUR
Bild1
This high quality fret leveling file is an investment for life. Size: 192x38x8mm.
Detalles
No.Art.
 
  Precio 
Encargar
09036  
29,80 EUR
Bild1
This fret recrowning file is good for large and medium frets.
Detalles
No.Art.
 
  Precio 
Encargar
09039  
17,80 EUR
Bild1
Fret file set with 3 burrs. Wide, medium and narrow.
Detalles
No.Art.
Descripción
  Precio 
Encargar
09037 File with 3 burrs
51,90 EUR
09147 Replacement burr, narrow
11,90 EUR
09148 Replacement burr, medium
12,50 EUR
09149 Replacement burr, wide
12,90 EUR
Bild1
Fret file with quarter-round concave filing surface on both sides, for shaping the frets from the side. In use, the file achieves best results if you hold it with the flat side facing down, in parallel to the frets. In this position the fretboard is more prevented of being damaged by the file. Equipped with an ergonomic hardwood holder for best handling.
 

Detalles
No.Art.
 
  Precio 
Encargar
09141  
44,80 EUR
Bild1
This small fret dressing file features a concave file in the center and a flat file on both sides. It it usable for wide and medium frets and perfect for fret end dressing jobs.
Detalles
No.Art.
 
  Precio 
Encargar
09173  
44,80 EUR
Bild1
Steel mask for protecting the fingerboard while you file the fret.
Detalles
No.Art.
 
  Precio 
Encargar
09045  
2,95 EUR
Bild1
Fretboard guard for Fender scale (64.77 cm / 25.5"), 22 fret slots. For protection of the fretboard while working on the frets. Laser-cut sheet steel, 0.3 mm thick.
Detalles
No.Art.
 
  Precio 
Encargar
09046  
77,00 EUR
09191
These files were originally designed for the production of knives, but are also very suitable for the (pre-)editing on hard nut-materials. The file is very sharp, so the span decrease can comfortably be regulated just with a litte pressure. High quality product made in Switzerland. Sweep length 200 mm, Cross section 21.4 x 4.8 mm.
Detalles
No.Art.
 
  Precio 
Encargar
09191  
32,80 EUR
09192
The best tool to file nuts in their final shape.After that only some finishing works with abrasives needs to be done. The square handle allows very sensitive and accurate working. Cut length 105 mm, overall length 215 mm, cut 1. Made in Switzerland.
Detalles
No.Art.
 
  Precio 
Encargar
09192  
19,80 EUR
09196
The set consists of four mini scrapers. Due to the size they are easy to control with thumb and two fingers and perfect for small-area-jobs. The rectangular scraper features two rounded notches e.g. for acoustic bridge saddle crowning.
Detalles
No.Art.
 
  Precio 
Encargar
09196  
19,80 EUR
09171
Stainless steel gauge for the 4 most important fretboard radii: 7.25", 9.5", 12" and 16".
Detalles
No.Art.
 
  Precio 
Encargar
09171  
12,90 EUR
Bild1
Hardwood sanding blocks which can be used for fretboard shaping or fret levelling. Widht: 7cm, lenght: 25cm. Made for 3M Stikit self-adhesive abrasives. 5 different radii available. 
Detalles
No.Art.
Descripción
  Precio 
Encargar
09151 7,25" Radius
14,90 EUR
09152 9,5" Radius
14,90 EUR
09153 12" Radius
14,90 EUR
09156 14" Radius
14,90 EUR
09154 16" Radius
14,90 EUR
09155 20" Radius
14,90 EUR
09219
Fretting hammer with shock-absorbing head and two medium-hard faces (30mm diameter) made of polyurethane (safety for the frets). Weight: 460 grams. Features a Hickory handle with ergonomic profile and non-slip surface.
Detalles
No.Art.
 
  Precio 
Encargar
09219  
24,90 EUR
Bild1
Guitar builders favorite. This 7cm wide self-adhesive abrasives feature a perfect cut performance and doesn't "load up" with dust like standard sandpaper. Available in 10m rolls or in pre-cutted pieces of 1 meter. 100-grit for fretboard sanding, 240-grit and 400-grit for fine sanding or fret levelling. Best choice for our radius-sanding blocks.  
Detalles
No.Art.
Descripción
  Precio 
Encargar
09160 100-grit, 10m roll
36,90 EUR
09161 240-grit, 10m roll
36,90 EUR
09162 400-grit, 10m roll
36,90 EUR
09165 100-grit, 1m
4,80 EUR
09166 240-grit, 1 m
4,80 EUR
09164 400-grit, 1m
4,80 EUR
Bild1
The kit includes 8 abrasive sheets (two 10cm x 15cm pieces of each grit: 1500, 2400, 3600, 6000) and a foam sanding block. We recommend this kit for polishing frets or finished surfaces. For polishing finished surfaces please use Micro-Mesh with water.
Detalles
No.Art.
 
  Precio 
Encargar
09167  
24,90 EUR
Bild1
A set of 4 foam pads (one 5cm x5xm piece of each grit: 1500, 2400, 3600, 6000) with abrasives on both sides. We recommend this set for polishing frets or finished surfaces. For polishing finished surfaces please use Micro-Mesh with water.
Detalles
No.Art.
 
  Precio 
Encargar
09168  
7,90 EUR
Bild1
Easy-to-use rubber blocks with abrasive grits. Excellent for polishing the frets.
Detalles
No.Art.
Descripción
  Precio 
Encargar
09175 150-grit
7,50 EUR
09176 180-grit
7,50 EUR
09177 400-grit
7,50 EUR
09178 1000-grit
7,50 EUR
09170
For 6 different fretboard radii: 7.25", 9.5", 10", 12", 14" and 16". Includes a scale to set up the string action in steps of 2/10 mm.
Detalles
No.Art.
 
  Precio 
Encargar
09170  
22,90 EUR
Bild1
Hand made micro chisel with a cutting widths of 3 mm. Ideal for trimming or cleaning nut and saddle slots.
Detalles
No.Art.
 
  Precio 
Encargar
09258  
21,90 EUR
Bild1
100x50x0,4cm. Non-skid foamrubber. The scratch-free way to safely rest a guitar for minor adjustments and repairs.
Detalles
No.Art.
 
  Precio 
Encargar
09210  
18,90 EUR
Bild1
Made of hardwood and steel, depth: 110mm, open to 200mm. The jaws have protective cork lining.
Detalles
No.Art.
  From 1 pcs./set From 3 pcs./set
Encargar
09033  
9,80 EUR
8,80 EUR
Bild1
Made of hardwood and steel, depth: 195mm, open to 200mm. The jaws have protective cork lining.
Detalles
No.Art.
  From 1 pcs./set From 3 pcs./set
Encargar
09031  
15,90 EUR
14,30 EUR
Bild1
The professional tool for drilling up pegholes up to 10mm.
Detalles
No.Art.
Descripción
  Precio 
Encargar
09214 6,3mm Diameter
8,90 EUR
09213 8,3mm Diameter
9,90 EUR
09211 10mm Diameter
11,90 EUR
Bild1
Luthier´s favorite. Bonds stronger than wood. Sands easily. 
Detalles
No.Art.
Descripción
  Precio 
Encargar
09048 118 ml
7,90 EUR
09300 473 ml
13,90 EUR
09255
Multitool with 10mm, 11mm and 1/2" wrench for pot-nuts, a 16mm socket wrench for toggle nuts and a multi-key for nuts with other sizes.
Detalles
No.Art.
 
  Precio 
Encargar
09255  
19,80 EUR
Bild1
Hex socket wrenches
Detalles
No.Art.
Descripción
  Precio 
Encargar
00W60 6 mm
2,20 EUR
00W63 6,3 mm
2,90 EUR
00W70 7 mm
2,30 EUR
09184
Created by our Special-Department: "Tools the world's been waiting for!" With the Rockinger Pullman Set, it is now possible to pull tailpiece bushings out of your guitar's body, without causing pressure marks on the surface of your guitar. Just turn the set-screw into the bushing (99% are open at the bottom) until it touches the wood, and then it will push up the bushing smooth and easily. The Rockinger Pullman Set contains a set-screw with a M8 metrical thread, and one with the common US-thread, as well as one allen wrench which fits for both.
Detalles
No.Art.
 
  Precio 
Encargar
09184  
6,90 EUR
Bild1
8,7mm hex socket wrench for Gibson truss rods.
Detalles
No.Art.
 
  Precio 
Encargar
00W87  
8,90 EUR
Bild1
Detalles
No.Art.
Descripción
  Precio 
Encargar
00W12 1,27mm, for US Strat
1,90 EUR
00W16 1,6mm, for US Wilkinson
2,30 EUR
00W24 2,4mm, US 3/32"
2,30 EUR
00W32 3,2mm, for Strat Bullet
2,50 EUR
Bild1
Detalles
No.Art.
Descripción
  Precio 
Encargar
00W15 1,5mm, Saddles
0,70 EUR
00W20 2 mm
0,90 EUR
00W25 2,5mm
0,90 EUR
00W30 3 mm
0,90 EUR
00W40 4 mm
1,10 EUR
00W50 5 mm
1,10 EUR
Bild1
Screw driver for height adjustment screws.
Detalles
No.Art.
Descripción
  Precio 
Encargar
09251 1,27 mm, for US Strat Saddles
4,95 EUR
09252 1,5 mm, for Saddles
4,95 EUR
09253 1,6 mm, 1/16"
4,95 EUR
09254 2 mm
4,95 EUR
Bild1
Rockinger Silicone Oil is the perfect lubricant for guitar nuts.

Application: carefully wipe the small brush at the edge of the bottle and give only a very small amount of oil into the nut slots (maybe every second time you change your strings). Use a cloth to immediately wipe away excess oil. Silicon oil can hardly be removed of most surfaces, that's why you should be very careful with it. Silicon oil is non-toxic and physiologically safe. Keep out of reach of children. Bottle contains 20ml.
Detalles
No.Art.
 
  Precio 
Encargar
09270  
8,90 EUR
Todos los precios incluyen el IVA alemán actual (19%).